Grid Guide is a buying and selling supervisor designed to work with a grid of orders. Can work concurrently with 20 order grids, and every grid can have particular person settings. The appliance creates a grid of orders mechanically for every master-order.
Grasp-order is an order opened utilizing the buttons on the panel, or an order opened by one other knowledgeable (supplied that Magic quantity=0). A grid of orders is hooked up to this order. The order grid exists so long as the master-order exists; when the master-order is closed, the order grid will probably be closed mechanically.
Settings
To begin working with the appliance, go to the Settings tab and set the order grid parameters. These settings are utilized when creating a brand new order grid. Sooner or later, an already open mesh can solely be edited from the MG tab. This manner you possibly can set particular person parameters for every of the 20 grids.
Grid parameter settings.
Grid sort
Order grid sort.
Restrict — the grid is constructed from BuyLimit or SellLimit orders, and is directed in direction of the lack of the primary order. This sort is utilized in methods with averaging losses.
Cease — the grid is constructed from BuyStop or SellStop orders, and is directed in direction of the revenue of the primary order. This sort is utilized in methods that improve income.
Step sort
Technique for calculating the order grid step.
- Step measurement (Fastened technique).
- Multiplier for rising steps (Fastened technique).
- Timeframe for the ATR indicator (ATR technique).
- Interval for the ATR indicator (ATR technique).
- Multiplier for step (ATR technique).
- Minimal step (ATR technique).
Step sort: ATR – the step measurement is dynamic and will depend on the studying of the ATR indicator: Step=ATR*Coefficient. The step is recalculated and the grid is rebuilt as every grid stage is triggered. To regulate the minimal step measurement, the Min. step (5) parameter is supplied. If the calculated step is lower than the Min. step worth, then the utility will take the Min. step worth as a step.
Step sort: Fastened — the step measurement is fastened. Step one is the same as the Grid step parameter (1), subsequent steps: Step=Earlier step*Step mult. (2).
Num. step
The variety of steps within the order grid.
Take revenue and cease loss settings for the order grid. Trailing cease and Breakeven perform settings.
TP sort и Take revenue
Settings for Take Revenue of the order grid.
TP sort for Restrict grid:
Off — Take revenue of every grid order is ready to the Take revenue (1) distance from the Grasp-order. As soon as the take revenue is ready, the appliance doesn’t management its location, and the person can transfer the take revenue of every order to any value.
Aggressive — The take revenue of every grid order is ready to the Take revenue (1) distance from the general breakeven stage of open grid positions. The take revenue location of every grid order is managed by the appliance, and the person can’t transfer the take revenue orders.
Conservative — The take revenue of every grid order is ready at a calculated distance from the general break-even stage of open grid positions. The space is calculated in such a manner that when the grid of orders is closed by take revenue, the dimensions of the entire revenue of the positions is the same as the revenue that the grasp place would have. The take revenue location of every grid order is managed by the appliance, and the person can’t transfer the take revenue of orders.
TP sort for Cease grid:
For the Cease grid, Take Revenue is ready to the Take revenue (1) distance from the final stage in direction of revenue.
Auto — The placement of the take revenue of every grid order is managed by the appliance. If the place of the acute grid stage adjustments, the appliance will mechanically transfer the take income of orders to the Take revenue distance. The person can’t transfer the take revenue of orders.
Off — As soon as the take revenue is ready, the appliance doesn’t management its location, and the person can transfer the take revenue of every order to any value.
Cease loss
Cease lack of all grid orders is ready on the identical stage:
- For Purchase grid — cease loss is ready from the final decrease stage of the grid, at a distance of Cease loss (1).
- For Promote grid — cease loss is ready from the final higher stage of the grid, at a distance of Cease loss (1).
Breakeven perform
The Breakeven perform is designed to mechanically transfer the cease lack of grid positions to the grid breakeven stage.
The appliance will transfer the cease lack of positions to the grid breakeven stage when the present value reaches the BreakEven Distance (1) distance, delayed from the grid breakeven stage. To offset the cease lack of positions from the breakeven of the grid, set the offset within the BreakEven Revenue (2) parameter.
Trailing cease perform
The trailing cease perform strikes the cease lack of grid positions following the present value, with a Trailing Cease (2) distance.
The trailing cease perform will start to work when the present value reaches the Trailing Begin (1)
To scale back the variety of order modifications, you possibly can improve the trailing cease step (3). For instance, should you set the step to 10, the perform will transfer cease losses in steps of 10 factors, thus decreasing the variety of modifications by 10 occasions.
Lot settings of the order grid.
Grasp lot
To calculate the lot of an order opened utilizing the buttons on the TR tab, you possibly can set one of many following choices:
Fastened – orders opened utilizing the buttons may have the lot specified within the Lot enter discipline (1).
Auto – orders opened utilizing buttons may have rather a lot calculated by the appliance. The lot is calculated utilizing the next system: Lot = Present Stability/worth within the discipline (1) * 0.01.
For instance:
Lot calculation technique – Auto,
Account stability – $50,000,
Worth within the discipline (1) – $10,000,
Lot = 50123/10000*0 .01=0.05.
Grid lot
Lot begin — lot for the primary order of the grid (0-off).
Calc. sort — technique for calculating the order grid lot:
Geometric — order lot = earlier lot × Lot step.
Arithmetic — order lot = earlier lot + Lot step.
Begin step – variety of the order grid step from which the lot will start to extend (0-off).
Max lot – most grid lot (0-off).
TR tab
The tab is meant for opening and shutting orders.
- Buttons for opening Purchase and Promote orders.
- Buttons for closing and deleting all Purchase or Promote positions and orders. Positions and orders are deleted solely from the present instrument which have the identical magic quantity as the appliance.
- Buttons for displaying line on the chart with a button for opening a pending order (4).
- A line with a button for opening a pending order is displayed by urgent a button from the group (3).
TR tab: Methods to open a place and order
To open a Purchase or Promote place, click on the button from group (1).
To open a pending order, click on the button from group (2), transfer the road that seems on the chart to the required value and click on the Open (4) button.
To ensure that the appliance to mechanically open Purchase or Promote positions, click on the Begin Purchase or Begin Promote button (1). When Auto commerce is enabled, the appliance will open a place supplied that the earlier place in the identical course is closed. Positions will probably be opened so long as Auto commerce is enabled..
To disable Auto commerce, press the Begin Purchase or Begin Promote (1) button once more, or set the utmost variety of positions (6) (when the utmost variety of positions is reached, Auto commerce will probably be disabled mechanically).
For Auto commerce you possibly can set further filters: Time vary (2,3)and value vary (4 ,5), wherein the appliance will open positions.
CL Tab
The tab is meant for closing orders and positions.
The Grid Shut subtab is meant for closing the order grid.
The appliance can handle as much as 20 order grids. To kind them, every grid has its personal quantity, akin to the master-order ticket. Every grid order, except for the master-order, has a remark with the variety of the grid to which it belongs. To shut the order grid, click on the button with the corresponding grid quantity.
- Present revenue of the order grid.
- Shut all order grid.
- Shut solely worthwhile positions belonging to the grid.
The All Shut subtab is meant for closing orders and positions when a specified quantity of revenue or loss is reached. This perform works towards all orders and positions on the account, no matter who opened them.
- Accounting for all orders and positions on the account:
Enabled – the appliance takes under consideration the revenue of all positions on the buying and selling account, and when a specified revenue or loss is reached, closes all orders and positions on the account.
Disabled – the appliance takes under consideration the revenue of positions solely on the present image, When a specified revenue or loss is reached, it closes all orders and positions solely on the present image. - Allow the perform of closing orders and positions primarily based on revenue *.
- Allow the perform of closing orders and positions upon reaching a loss*.
* The revenue and loss worth may be entered with a plus and minus signal. If you wish to enter a unfavourable quantity, you need to put a minus register entrance of the quantity.
- Examples for revenue worth (2):
The present order revenue is $ 200, and also you need the utility to shut the orders if the revenue rises to $ 400. On this case, you enter 400 within the revenue discipline, and not using a minus signal.
The present order loss is $ -500, and also you need the utility to shut orders when the loss decreases to $ -300. On this case, you enter -300 within the revenue discipline, that’s, with a minus signal. - Examples for the loss worth (3):
The present order revenue is $ 200, and also you need the utility to shut the orders if the revenue drops to $ 100. On this case, you enter 100 within the loss discipline, and not using a minus signal.
The present order revenue is $ 10, and also you need the utility to shut the orders when it reaches a $ -100 loss. On this case, you enter -100 within the loss discipline, that’s, with a minus signal.
VG tab
The VG tab is designed to allow/disable the show of grid ranges. Ranges are displayed as traces, the colour and elegance of that are configured from the enter parameters.
- Present / cover the degrees of all grids.
- Present / cover the degrees of the desired grid.
MG tab
The MG tab is designed to handle present order grids.
- Buttons to go to establishing the order grid.
- Button to cease grid management.
To vary the parameters of the order grid, click on the button with its quantity (1).
The order grid settings are divided into three teams: Setting, Grid and Tp/Sl. All adjustments on this tab apply solely to the chosen order grid.
- The grid quantity.
- Grid sort (Restrict or Cease).
- Technique for calculating the step measurement (Fastened or ATR).
- Timeframe for the ATR indicator (ATR technique).
- Interval for the ATR indicator (ATR technique).
- Multiplier for the step (ATR technique).
- The minimal step (ATR technique).
- The variety of steps within the grid.
- Button to cease managing the order grid.
- Step measurement (Fastened technique).
- Multiplier for step improve (Fastened technique).
- Save the adjustments.
- Reset adjustments.
To save lots of adjustments, click on (11). To reset your adjustments earlier than the final saved state, click on (12).
To quickly cease monitoring the order grid, click on (9). When monitoring is stopped, all buying and selling operations for this grid of orders are stopped, which signifies that the utility is not going to modify the grid positions and won’t open new orders for it. To renew buying and selling, click on (9) once more.
If adjustments to the grid settings are made when buying and selling is stopped, the adjustments will solely take impact when buying and selling is resumed.
For extra details about the parameters of this tab, see the settings Tab: Grid.
- Fulfilled ranges.
- The chosen stage for adjustment.
- Buttons for scrolling the listing.
- The extent chosen for configuration.
On this tab, you possibly can change the place of the extent and its lot.
Methods to change the value of the grid stage
To vary the place of the grid stage, choose it within the listing of orders. Transfer the flashing line that seems to the specified location and click on SAVE.
You possibly can solely change the extent place when Step sort — Fastened. When the Step sort — ATR place is ready, the step is calculated utilizing the Common True Vary indicator.
Methods to change the open grid stage lot
To vary the dimensions of a stage lot, double-click its cell and open the enter discipline. Enter the required lot within the discipline that seems and click on SAVE.
- Kind of take revenue calculation (Aggressive or Conservative, just for the Restrict grid sort).
- Take revenue for the grid of orders (in factors, 0 — off).
- Cease loss for the grid of orders (in factors, 0 — off).
- Breakeven distance (in factors, 0 — off).
- Revenue for the breakeven perform (in factors).
- Distance to begin the trailing cease (in factors).
- Trailing cease distance (in factors, 0 — off).
For extra details about the parameters of this tab, see the settings Tab: Tp/Sl.
To save lots of the settings, click on SAVE.
Transferring the grid take revenue to the final stage
This perform works solely when TP sort = Off , and is meant to set the entire take revenue stage of all grid orders.
- Button for modifying orders. By clicking on this button, the take revenue of all orders will probably be moved to the desired stage.
- Cancel button.
- The value of the extent to which the take revenue will probably be moved.
- Revenue of grid positions on the present stage.
- Revenue of all grid orders on the present stage (all grid orders are taken under consideration, together with those who haven’t but been opened).
Enter parameters
- ===LOT ORDER===
- Lot calculation sort — technique for calculating the master-order lot (opened by buttons on the TR panel).
- Lot/$ — worth for Lot calculation sort.
- ===LOT GRID===
- Lot begin — lot measurement for the primary order within the grid (0 – off).
- Calculation begin step — variety of the extent from which the lot will start to extend (0 – off).
- Сalculation sort — technique for calculating rather a lot in a grid of orders.
- Lot step (geometric, arithmetic) — worth for Calculation sort.
- Max lot — most allowed lot within the order grid (0 – off).
- ===GRID===
- Pending order — on/off use pending orders.
- Order grid sort — course of the order grid (Restrict or Cease).
- Beginning lot — lot measurement for orders opened from the TR tab.
- Lot multiplier — multiplier for rising the lot of the order grid.
- Step sort — technique for calculating the step (Fastened or ATR).
- Grid step (Fastened) — step measurement (for the Fastened technique).
- Timeframe (ATR) — timeframe for the ATR indicator (for the ATR technique).
- Interval (ATR) — the interval for the ATR indicator (for the ATR technique).
- Coefficient (ATR) — multiplier for the step (for the ATR technique).
- Min grid step (ATR) — the minimal step (for the ATR technique).
- Variety of steps — the variety of steps within the grid.
- Take revenue sort — the kind of take revenue calculation (Aggressive or Conservative, used just for the Restrict grid sort).
- Take revenue (0-off) — take revenue for the grid of orders (in factors, 0 — off).
- Cease loss (0-off) — cease loss for the grid of orders (in factors, 0 — off).
- BreakEven Distance (0-off) — distance for breakeven (in factors, 0 — off).
- BreakEven Revenue — revenue for the breakeven perform (in factors).
- Trailing Begin — distance to begin the trailing cease (in factors).
- Trailing Cease (0-off) — the gap of the trailing cease (in factors, 0-off).
- Makes an attempt to open an order — the variety of makes an attempt to open an order if the earlier try was unsuccessful.
- Magic quantity — order ID.the utility makes use of this quantity to search out its orders.
- Slippage — the utmost allowed value slippage when opening and shutting an order.
- ===ALL CLOSE===
- Shut revenue — on/off the perform of closing orders on the account when the desired revenue is reached. (for the technique tester)
- Quantity of revenue — the quantity of revenue.
- Shut loss — on/off the perform of closing orders on the account when the desired loss is reached. (for the technique tester)
- Quantity of loss — the quantity of loss.
- ===AUTO TRADE===
- Begin Purchase (For the tester) — activate/off autotrading for Purchase within the technique tester.
- Begin Promote (For the tester) — activate/off autotrading for Promote within the technique tester.
- Begin Time — on/off auto buying and selling from a specified time.
- Begin Time Purchase — begin of auto buying and selling for Purchase.
- Begin Time Promote — begin of auto buying and selling for Promote.
- Cease Time — on/off auto buying and selling till a specified time.
- Cease Time Purchase — time for completion of auto buying and selling for Purchase.
- Cease Time Promote — time for completion of auto buying and selling for Promote.
- Max Value — on/off most value for auto buying and selling.
- Max Value Purchase — most value for Purchase.
- Max Value Promote — most value for Promote.
- Min Value — on/off minimal value for auto buying and selling.
- Min Value Purchase — minimal value for Purchase.
- Min Value Promote — minimal value for Promote.
- Max Positions — on/off disable auto buying and selling after opening a specified variety of positions.
- Max Positions Purchase — most variety of positions for Purchase.
- Max Positions Promote — most variety of positions for Promote.
- ===LEVELS===
- Model ranges — the type of the traces that signify the grid ranges.
- Colour lively purchase ranges — the colour of the lively Purchase ranges within the grid.
- Colour inactive purchase ranges — shade of inactive Purchase ranges within the grid.
- Colour lively promote ranges — the colour of lively Promote ranges within the grid.
- Colour inactive promote ranges — shade of inactive Promote ranges within the grid
- Colour textual content — the colour of the textual content of the degrees.
- ===SOUNDS===
- Sound button — sound for the buttons.
- Sound button person — customized button sound.
- Sound error — sound for errors.
- Sound error person — customized sound for errors.
- ===INTERFACE===
- Buttons market orders on/off — present / cover place opening buttons.
- Buttons pending orders on/off — present / cover buttons for opening pending orders.
- Buttons closing orders on/off — present / cover buttons for closing all orders.
- Present the breakeven stage — present / cover the breakeven stage of the order grid.
- Сolor breakeven line — the colour of the breakeven line.
- Dimension panel — panel measurement. When selecting measurement # 2 or # 3, choose the suitable font measurement for the textual content.
- Font measurement on the panel — the font measurement of the panel textual content.
- Font measurement on the chart — the font measurement of the textual content on the chart.
